Jual Sanwa PC710 Digital Multimeter

Specifications Sanwa PC710 Digital Multimeter

PC710	Measuring range	Best accuracy	Resolusion	Input impedance
DCV	60m/600m/9.999/99.99/999.9V	±(0.06%+2)	0.01mV	10MΩ
ACV	60m/600m/9.999/99.99/999.9V	±(0.5%+3)	0.01mV	10MΩ
DCA	600μ/6000μ/60m/600m/6/10A	±(0.2%+4)	0.1μA
ACA	600μ/6000μ/60m/600m/6/10A	±(0.6%+3)	0.1μA
Resistance	600/6k/60k/600k/6M/60MΩ	±(0.1%+3)	0.1Ω
Conductance	99.99S	±(0.8%+10)	0.01nS
Capacitance	60n/600n/6μ/60μ/600μ/6m/25mF	±(0.8%+3）※	0.01nF
Temperature	-50～1000°C(thermocouple K type)	±(0.3%+2)	1°C
Frequency	15Hz～50kHz	±(0.04%+4)	0.01Hz
Logic frequency	5Hz～1MHz	±(0.03%+4)	0.001Hz
Duty cycle	0%～100%	±(3d/kHz+2)
Continuity	Buzzer sounds at between 20Ω and 300Ω Open voltage:approx.1.2V
Diode test	Open voltage : approx.3.5V
Electric field sensing (EF)	At the standard sensing voltage of about 20V or more,the bar graph and intermittent sound vary in 5 steps

Display	numeral display 9999 & 6000, bar graph 41 segments
Sampling rate	5 times/sec. 60 teims/sec.for bar graph
Bandwidth	V:40Hz～3kHz 3kHz～20kHz（below 99.99V） A:40Hz～1kHz
Fuse	11A/1000V IR20kA Φ10× 38 mm 0.4A/1000V IR30kA Φ 6.3× 32 mm
Battery	6F22(9V)x1
Battery life	Approx. 60h (manganese battery) at DCV range
Size/Mass	H184×W86×D52mm/Approx.430g（including holster)
Safety	IEC61010 CAT.Ⅲ600V/CAT.Ⅱ1000V

※Accuracies with film capacitor or better, which has low leakage current

4 digits 9999 count & 3-5/6 digits 6000 count
Dual Display shows voltage/current and its frequency, and AC components and DC components of voltage/current
AC True RMS
EF(Electric Field) Detection to indicate signal strength of electric field which surrounds current-carrying conductors
Capture (peak hold) 1ms in duration
MAX, MIN, AVE recording mode
K type temperature -50℃〜1000℃
– Optional accessory K-AD is necessary.
– K type temp. sensor K-250PC is included as a standard accessory.
Frequency measurement (AC sine wave only)
Logic frequency measurement, duty cycle measurement
Conductance measurement

Low-pass filter for variable frequency drive(VFD) 　circuit
Current (mA / μA) %4-20mA measurement
Capture (peak hold) 0.8ms in duration
MAX, MIN, AVE recording mode
K type temperature -50℃〜1000℃
– Optional accessory K-AD is necessary.
– K type temp. sensor K-250PC is included as a standard accessory.
Frequency measurement (AC sine wave only)
Logic frequency measurement, duty cycle measurement
Conductance measurement
Dual display with backlight
Data hold, Range hold
Relative value
Auto power saving mode (30min.) (cancelable)
Optical Link USB interface (optional)
Display : numeral display 50000 & 500000 selectable, bar graph 41 segments
Sampling rate : 5 times/sec. for 50000 count, 1.25 times/sec. for 500000 count, 60 times/sec. for bar graph
Battery life : Approx. 100h (alkaline battery) at DCV range