Jual Ligno-Scanner SDM Moisture Meter

Specification

Measuring Range 5-60% dependent upon species setting*
Display 0.1% resolution for the entire range.
Species Corrections 71 wood group settings, or use the specific gravity of the wood between 0.3 and 1.0 (setting 30-100).Bamboo settings for horizontal, vertical and strand bamboo.
Gypsum Scale 0-2%
Reference Scale 0-99 for non-wood building materials3 Reference scales with different sensitivity levels from soft to hard building materials
Calibration Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
Calibration Check  External calibration check block #TS is available to verify the calibration and functions of meter.
Included Pouch, one 9V battery, manual and laminated wood group chart.
Size Pocket-size  2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
Weight 8 ounces (200g), made out of high-impact plastic
Warranty All moisture meters have a 2 year warranty. Pins and battery are excluded.

 

The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings

*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.

Deskripsi

Ligno-Scanner SDM Moisture Meter

Why choose a Scanner from Lignomat: Lignomat’s unique measuring technology assures calibration accuracy, reliability and repeatability backed by a 2-year warranty on all moisture meters. The Ligno-Scanner SDM pinless moisture meter has very unique features such as calibrations to measure the moisture in bamboo.
The Ligno-Scanner SDM clearly outperforms most pinless moisture meters on the market today. The meter has 2 independent sets of calibrations one for measuring 1/4″ deep and one for measuring 3/4″ deep. Dual-depth settings are available for different wood species, drywall, reference scales for concrete and other building materials. The bamboo calibration settings (flat and vertical grain and strand, carbonized) are for a measuring depth of 1/4″.
The moisture meter of choice for multi-material applications:
flooring, restoration, inspection and construction.

Dual-depth – a new approach to scanning – works well for:
– Different boards thicknesses, over 3/4″ and less than 3/4″ thick.
– Measuring layered engineered panels.
– Comparing surface / core moisture to see if boards are dried evenly.
– Floor testing at 1/4″ depth assures only the floor planks are
– measured and not the concrete or subfloor underneath.
– Checking surface moisture after water damage or after applying
– waterborne finishes.




Produk lain : https://distributorflowmeters.com/

 

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Jual Ligno-Scanner SDM Moisture Meter”

Alamat email Anda tidak akan dipublikasikan.