MGK Kemayoran LT.GF Blok C.1 No.5

Jual Sanwa PC720M Digital Multimeter

Specifications Sanwa PC720M Digital Multimeter

PC720M Measuring range Best accuracy Resolution Input impedance
DCV 60m/600m/9.999/99.99/999.9 ±(0.06%+2) 0.01mV 10MΩ
ACV 60m/600m/9.999/99.99/999.9 ±(0.5%+3) 0.01mV
DCA 600μ/6000μ/60m/600m/6/10 ±(0.2%+4) 0.1μA
ACA 600μ/6000μ/60m/600m/6/10 ±(0.6%+3) 0.1μA
Resistance 600/6k/60k/600k/6M/60MΩ ±(0.1%+3) 0.1Ω
Conductance 99.99nS ±(0.8%+10) 0.01nS
Capacitance 60n/600n/6μ/60μ/600μ/6m/25m ±(0.8%+3)※ 0.01nF
Temperature -50~1000°C(thermocouple K type) ±(0.3%+2) 1°C
Frequency 15Hz~50kHz ±(0.04%+4) 0.01Hz
Logic frequency 5Hz~1MHz ±(0.03%+4) 0.01Hz
Duty cycle 0%~100% ±(3d/kHz+2) 0.01%
Continuity Buzzer sounds at between 20Ω and 300Ω Open voltage:Approx.1.2V
Diode test Open voltage:approx.3.5V
Display numeral display 9999 & 6000
Bar graph 41 segments
Sampling rate 5 times/sec.
60 times/sec. for bar graph
Bandwidth V:40Hz~3kHz 3kHz~20kHz(below 99.99V)
Fuse 11A/1000V IR20kA Φ10× 38 mm
0.4A/1000V IR30kA Φ 6.3× 32 mm
Battery 6LR61(9V)x1
Battery life Approx.100h (alkaline battery) at DCV range
Size/Mass H184×W86×D52mm/430g(including holster)
Safety IEC61010 CAT.Ⅲ600V/CAT.Ⅱ1000V

※Accuracies with film capacitor or better, which has low leakage current

Optional Accessories:

  • Software : PC Link7
  • Optical PC link cable : KB-USB7
  • Clamp probe : CL-20D, CL-22AD, CL33DC
  • Temperature probe : T-300PC (PC Link software is necessary.) K-8-250〜800
  • K type adapter : K-AD
  • Test lead : TL-21M, TLF-120
  • Carrying case : C-PC7
  • Clip adapter : CL-13a, CL-14,CL-15a, CL-DG3a, TL-9IC


Sanwa PC720M Digital Multimeter

Karya Mandiri Techindo has a wide range of Sanwa products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Features Sanwa PC720M Digital Multimeter

  • 4 digits 9999 count & 3-5/6 digits 6000 count
  • AC True RMS
  • Dual display with backlight
  • Automatic measurement for ACV/DCV/Ω under low impedance
  • High speed bar graph
  • Capacitance measurement
    – Not suitable for measurement of condensers with large leak current.
  • K type temperature -50℃〜1000℃
    – Optional accessory K-AD is necessary.
    – K type temp. sensor K-250PC is included as a standard accessory.
  • Frequency measurement (AC sine wave only)
  • Logic frequency measurement, duty cycle measurement
  • Conductance measurement
  • MAX, MIN, MAX-MIN recording mode
  • Capture (peak hold) 1ms in duration
  • Data hold, Range hold
  • Relative value
  • Auto power saving mode (30min.) (cancelable)
  • Optical Link USB interface (optional) Data Logging Mode
  • 87,328 data points in built-in memory (single display)
    – 43,664 data points in built-in memory (dual display)
  • Selection of measurement interval
    – 0.05s/0.1s/0.5s/1s/2s/3s/4s/5s/10s/15s/30s/
    – 60s/120s/180s/300s/600s
  • Auto-standby mode when a sampling speed of 30s or longer is selected
  • Export logged data to PC
  • Optional accessory PC Link7 is necessary.
  • Display : numeral display 9999 & 6000, bar graph 41 segments
  • Sampling rate : 5 times/sec., 60 times/sec. for bar graph Max.EN61326-1:2006
  • Battery life : Approx. 100h (alkaline battery) at DCV range