LOCATION

MGK Kemayoran LT.GF Blok C.1 No.5

TELEPHONE

0212913405602129134056

EMAIL

salescakraglobalindo@gmail.comsalescakraglobalindo@gmail.com
SHOPButton
0212913405602129134056
salescakraglobalindo@gmail.comsalescakraglobalindo@gmail.com
Close Menu

Jual Ligno-Scanner S Moisture Meter

Specification

Measuring Range 5-60% dependent upon species setting*
Display 0.1% resolution for the entire range.
Species Corrections 71 wod group settings, or simpy use the specifi graviy of the wood, betwee 0.3 and 1.0 (setting 30-100)
Measuring Depth 1/4″ measuring depth
Reference Scale 0-99 for non-wood building materials
Calibration Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
Calibration Check  External calibration check block #TS is available to verify the calibration and functions of meter.
Included Pouch, one 9V battery, manual and laminated wood group chart.
Size Pocket-size  2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
Weight 8 ounces (200g), made out of high-impact plastic
Warranty All moisture meters have a 2 year warranty. Pins and battery are excluded.

The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings

*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.

Kategori: Tag: , , , , , , , ,

Deskripsi

Ligno-Scanner S Moisture Meter

Lignomat’s Pinless Advantage:
Quickly scan large number of boards without leaving pinholes
No effort is required to push pins into hardwood
Pinless meters can read lower moisture values in hardwood than pin meters

The Ligno-Scanner S gives true wood moisture readings in percent with built-in corrections for different species. Corrections can also be used by entering the specific gravity between 0.3 and 1.0. Resolution is 0.1% for entire measuring range. All Lignomat pinless moisture meters include a HOLD function.
Lignomat’s unique measuring technology assures calibration accuracy, reliability and repeatability backed by a 2-year warranty on all meters.
When selecting the right pinless moisture meter for your application consider measuring depth and the materials you will measure. The measuring depth is crucial for any pinless meter.
Pinless moisture meters are usually calibrated for wood 3/4″ thick. The Ligno-Scanner S is set for 1/4″ deep, therefore it works great for all boards less than 3/4″ thick. The S also works for veneer wood, 1mm and up. For thinner veneers we recommend measuring a stack of a few sheets.
The meter is sensitive to surface moisture so it can check waterborne finishes, veneer wood and can measure surface moisture.
Measure non-wood building materials with the reference scale 0-100.
Works great for compare and search mode in restoration applications.

Produk lain : https://distributorflowmeters.com/

 

Produk Terkait