Deskripsi
Sanfix WT2110 Coating Thickness Gauge
A coating Thickeness Gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical measurement in the coatings industry because of its impact on the coating process, quality and cost.
Specifications Sanfix WT2110 Coating Thickness
- Measuring Range : 0-1800 u m
- Accuracy -/+ (3%H-/+ u m)
- Resolution: 0.1 u m ( 100 u m) or 1 u m ( 100 u m)
- High Sensitivity Sensor: For precise measurements
- Minimum diameter of magnetic metal substrate: 12mm
- Magnetic metal substrate minimum thickness: 0.5mm
- Minimum radius of curvature for magnetic convex substrate : 2mm
- Minimum radius of curvature for magnetic concave substrate : 11mm
- Minimum diameter of non-magnetic metal substrate: 50mm
- Minimum thickness of non-magnetic metal substrate: 0.5mm
- Zero Point / Two Point / Basic Calibration : Yes
- Measurement Mode: Single, Continuous and Difference
- Storage / Remember / Delete Data Function : Yes
- Data Analysis: Average, Maximum, Minimum
- Deviation Time and Measurement : Yes
- Beep Sound Indication: Yes
- Low Battery Indication : Yes
- Auto Power Off : Yes
- Unit Size: 80 x 38 x 150 mm
- Power : 3×1.5V A3
- Battery: 3×1.2V NiMH battery (weight 36.5g) or 5V1A . power adapter
- Size : 70.30*38.6*149.59mm
- Weight: 136.9 (including battery)
